（9）Combustion Adjustment method of Oil-fired Gas-fired Boiler
The combustion adjustment of oil-fired gas-fired boiler is successful and the load adjustment can be carried out after turning into normal operation. At this time, the combustion situation in the furnace should be observed frequently. If the atomization of oil and gas is not good, the flame jumps, the flame hits the furnace tank, and the exhaust temperature is too high or too low, the oil pressure, oil temperature, steam volume, air pressure and steam pressure should be adjusted in time to ensure the safe and economical operation of the boiler. The oil pressure and the pressure are related to the boiler load. The adjustment of the oil pressure is realized by adjusting the pressure of the burner or the amount of oil returned. The adjustment of air pressure is achieved through the opening of the valve. When adjusting a load, enter At the same time, the air volume adjustment must be carried out synchronously to ensure the reasonable match between the oil quantity and the air volume, so as to achieve the purpose of economical operation of the boiler.
How fuel (gas) oil or condensing boiler manufacturer stack height standards should be implemented as specified?According to requirements "Boiler Air Pollutants Emission Standard" -GB13271-2014 existing files countries, oil, gas boiler chimney of not less than 8 meters, the height of the boiler chimney by specific approval of environmental impact assessment documents OK. When there is a building within a radius of 200m from the new boiler room around the chimney, the chimney should be higher than the tallest building in more than 3m.
For more than two decades, it has been the focus on clean oil or condensing boiler manufacturers, the insistence on precision and wisdom, and the pursuit of exquisite craftsmanship that have made today's Fangkuai boilers. Fangkui Boiler will always be based on the boiler industry, and will return customer support and trust with brilliant results and sophisticated technology.
ZG oil or condensing boiler manufacturer is a manufacturing enterprise that has been immersed in the field of boiler manufacturing for decades. ZG boiler produces various types of school bath boilers. The use of school oil and gas boilers is more convenient, and the boiler uses a variety of technologies to enable the boiler to achieve ultra-low nitrogen emissions, with boiler thermal efficiencies as high as 95%-98%. The school biomass bath boiler uses biomass fuel, which embodies the boiler's ability to save conventional energy and reduce pollution. However, the use of such boilers generally uses a large amount of biomass fuel, so that the boiler is more convenient to use in places where biomass is easily obtained.
