Third, 3500kw vacuum hot water boiler to take automatic intelligent control mode, can be realized when using the remote or unmanned intelligent network control can be used to manipulate the device, and the inner stainless steel boiler provided with a heat exchanger so as not to appear rusty phenomenon and not pollute the water.
Analysis of how the production side if the vacuum boiler formal professional formal professional vacuum producers able to provide professional boiler to the public, targeted one-design, and can provide a more professional and authoritative vacuum boiler system plan to the public, can guarantee exact best standards in the industry, may have the most cost-effective high-performance, make sure you buy other financial burden does not exist, and the characteristics and safety of use, it can get the best authority standards.
Fast boiler strong technical team and perfect after-sales service to our left a deep impression, the successful completion of the boiler installation and commissioning work at a predetermined period. The company offered me two Taipower heating steam boilers, combined with the actual situation of our company, as we save a lot of fuel costs, thanks to fast boiler provides us with such high-quality products and peace of mind. --customer feedback
Boiler feed water preparation device preparing process advantages and disadvantages current power boiler feed water system ultrapure water substantially above three processes, rest of the process are carried out with different combinations of the three basic process on the basis of the above derived. Their disadvantages are now listed in the following: 1, a first ion exchange resin is advantageous in that low initial investment, space occupied, but the disadvantage is the need for frequent regeneration of ions, pH-consuming, but also for the environment certain destructive. 2, the second stage reverse osmosis equipment, which is characterized by the early administration level attained manner using ion exchange resin is higher, but without resin regeneration. The disadvantage is that the original film is related to be cleaned or replaced regularly, the water quality is not too high, relatively speaking, most can do about 1us / cm. 3, the third reverse osmosis for pre-matched electro-deionization (EDI) apparatus, which is ultra-pure water system to take the preparation of ultrapure water most economical and environmentally friendly, it does not require regeneration with acid continuous Preparation of ultrapure water, no environmentally destructive. The disadvantage is that the initial investment is relatively above two methods are too expensive. High-pressure boiler feed water treatment equipment for industrial and mining enterprises and medium-sized thermal power plant and boiler feed water treatment. The world's most advanced reverse osmosis membrane element, pressure vessels and other equipment, supported by reasonable and have a pre-processing and post-processing equipment, can produce boiler feed water in line with national or industry standards (GB1576-79, DL / T561-95) super pure water. In the membrane treatment system, used typically ultrafiltration pretreatment 1mm diameter hollow fiber, to remove suspended solids and colloids in raw water, the biggest problem is the pretreatment as UF membrane fouling and membrane clogging for this often provided at the front pre-filter, to remove large particle suspension was pre-filtered before flocculants, such as PAC (poly acrylic acid) can improve the filtration quality, and reduce the membrane resistance. The amount of dissolved oxygen to the boiler feed water system of the plant required for the general requirements 0.3mg / L or less, for degassing membrane should be operated at a vacuum of less than 5.33Kpa (40TORR) a. IPC programmable control system control, automatic start and stop, dosing and flushing, automatic monitoring of various operating parameters, for production management.
